Keithley 6517-TP Thermocouple Bead Probe (K-Type) for Model 2110

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Keithley 6517-TP Thermocouple Bead Probe (K-Type) for Model 2110Keithley 6517 TP Thermocouple Bead Probe (K Type) for Model 2110 Designed for Keithley 2110 100, 2110 120, 2110 220. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.

High speed—up to 1200 readings/second

001 mbar) for low-pressure work

and 150 ps single-shot time interval resolution (versus 500 ps on the 53131A)

a remote output on-off terminal in the front panel and a signal I/O port in the rear panel are provided as the means for remote start/stop control of the safety tester

Lab bench use is supported through fan speed control that helps minimize acoustic noise

to avoid the damage caused by improper operation to SPD-3606 and DUT

01% + 250 µA Ripple and Noise (20 Hz to 20 MHz) Normal-mode voltage <350 µV rms / 2 mV p-p Normal-mode current <2 mA rms Common-mode current <1

and N6702A respectively — and only the N6702A offers the automatic AC-line power scaling that lets a 1200 W frame run from a standard outlet: it senses the available AC line power at turn-on and limits output to 600 W on a standard outlet

54642A/D: ~700 ps Single Shot Bandwidth 54621A/D

It allows users to verify full-scale meter readings on all ranges and confirm meter tracking by connecting three cables between the power meter and calibrator

50 MHz to 18 GHz

stocking and holding its own inventory in a 20

Exchange/Return Notes